Wire Rope Grips 10Mm X10 - Bulldog Clamp Cable Galvanised Commercial 600988491236

SecureFix Direct

Specifications:Product Code: SFCOMG10Product Weight: 0.6KGx10 10MM Galvanised Commercial Wire Rope Grip DIN741Suits 10MM Wire RopeFinish - GalvanisedQuantity - 10 PRODUCT CODE A (MM) B (MM) C (MM) D (MM) E (MM) F (MM) G (MM)SFCOMG03 12.6 5.2 10 3.4 20.2 9.1 18.6SFCOMG05 13 6.2 11 4.6 23.8 9.2 22SFCOMG06 16 7.6 12 5 28 10 24SFCOMG08 20 10 14 6 35 14 28.5SFCOMG10 24 11.5 18 8 45 17 34SFCOMG11 23 11.5 19 8 44 18 36SFCOMG12 21.5 13 22 10 56 21 41SFCOMG14 31 12 22 10 55 21 41SFCOMG16 32 16 25 12 64 26 50SFCOMG20 41 20 27 12 75 26.5 54SFCOMG22 44 24 32 14 86 35 61SFCOMG25 42 27 36 13 87 36 65SFCOMG30 56 31 35 16 111 41 74SFCOMG32 58 36 41 16 121 48 78SFCOMG38 70 41 45 16 143 54 89SFCOMG50 65 51 51 17 154 62 105Our Wire Rope Grips, manufactured from mild steel with a galvanised coating for corrosion resistance, are suitable for use on board boats in a rigging setup, or similar applications on land. The main use of these grips is to create loops of wire in a rope assembly, or when a temporary join is needed.Notes on assembly and use.1 - Prior to fitting, the threads on the nuts and bolts should be well greased.2 - Spacing between the grips should be at least 6 times the diameter of the rope.3 - Ensure the grip is always orientated correctly, the 'u' bolt should placed on the unloaded end of the rope.4 - Tighten each nut evenly and in turn to achieve the recommended torque settings.5 - Leave unused for 24 hours and check torque setting again, re-tighten if necessary.6 - After first application of the load, re-check torque setting, re-tighten if necessary.7 - During service periodically check the torque setting.