Taytools 467597 Wheel Marking Gauge Mortise and Tenon Attachment Set for Marking Both Sides of Mortises and Tenons in One Pass Adjusts Down to 3/8 inch
Taytools
This Wheel Marking Gauge Mortise Attachment Set will interface with any wheel marking gauge with a 8 mm or .310 inch diameter shaft. It is guaranteed to work with all Taytools wheel marking gauges. Set comes with 2 cutters, one spacer and a hex wrench. When attached and adjusted this set allows layout of both sides of a mortise and tenons in a single pass. The round cutters slice the wood as opposed to scratching and tearing when using traditional double pin marking gauges. These cutters will make a distinct mark both with and against the grain. They are easily sharpened by rubbing on a sharpening stone or sandpaper. Made from hardened tool steel. Adjustments are made by loosening/tightening the set screws. Can be adjusted as close as 3/8 inch apart. Comes with a spacer washer to more easily keep the marking gauge rod parallel to the workpiece to ensure both marks are equal depth. Set comes with 2 cutters, one spacer and a hex wrench., Manufacturer: Taylor Toolworks
Compare prices (1 shop)
| shop | Price | Action |
|---|---|---|
|
49,71 GBP | Go to shop |
