CONQUERALL DC 12V 5W Waterproof Submersible Pump 200L/H 2m with 3.3ft Tube for Yard Drainage, Hydroponics and Solar Fountain
CONQUERALL
【Specifications】Voltage: DC 12V, Power: 5W, Max flow rate: 53GPH (200 L/H). Minimum working voltage: 5V, Maximum head: 6.5 ft (2 m), inlet/outlet diameter: 8.5mm. Recommended silicone tube: ID 7mm × OD 10mm. AC power and overvoltage are forbidden to avoid pump damage. 【High Efficiency & Low Noise】Built with pure copper brushless motor for steady output and extended service life. Operating noise is controlled below 32dB, suitable for both indoor and outdoor installation. The matched impeller and bearing ensure continuous operation without overheating. 【Premium Sealed Structure & Safe Design】Static seal structure with stainless steel shaft effectively prevents water leakage. Whole motor and circuit board are epoxy encapsulated to reach IP68 waterproof grade, electromagnetic isolation avoids electric leakage for safe use around kids and pets. Equipped with four bottom suction cups for stable fixing on smooth surfaces. 【Where You Can Use It】Aquariums, ponds, outdoor camping water supply, yard/basement drainage, water gardens, desktop fountains, hydroponics, DIY water cooling, small appliances, 3D printers & laser engravers, cooler drainage, solar fountains, lapidary cooling, and more. 【Operation Guidelines】This pump has no self-priming function and must be fully submerged in water while running. It adapts to fresh water and seawater only, keep away from corrosive liquid. Do not run the pump dry or pull it by power cord. Max working water temperature is 80℃. Clean the pump every 1–2 weeks to maintain good performance., Weight: 0.35935348706 pounds, Manufacturer: CONQUERALL
Compare prices (1 shop)
| shop | Price | Action |
|---|---|---|
|
|
16,64 GBP | Go to shop |
