Gnimauhz Kitchen 59-Inch or 150CM Pull Down Sink Faucet Replacement Pull Out Spray Head Hose Stainless Steel (Electroplating, 1.5 meters)

Gnimauhz

Hose ************************************************************* designed for pull-down faucet parts .The one end of the kitchen ************************************************************* hose with the sprayer: G1/2 " Female Thread (about 3/4" ,19mm )Connects to Sprayer , fits most spray heads which have G1/2 straight male thread ( thread size about 2 cm or 0.8 inch). not NPT, not universal, not applicable Spray at 1/2 ＂. Not a universal shower head connector. The other end of the pull out hose: Link to the faucet, It does not come with quick link connectors. not suitable for quick-connect faucets. Below thread distance are both 14.75mm,but their thread distance are different. our ************************************************************* hose is male 15 with small gap thread which is 1mm (another male 15 with large gap thread which is 1.5mm,but not our hose dimension!!!) before buying, please check the size of the connector again! Not universal!! Warm reminder: the buyer commented that the ************************************************************* tube is suitable for some brands of faucets, but this does not mean that it is suitable for all models of the brand's faucets. Please check the size carefully according to the instructions, and ************************************************************* the two ends of the tube with the same size to fit. The length depends on personal preference, there will be errors in different batches The material of the G1/2 is copper, the outside of the hose is stainless steel, and the inside is rubber.Because the outer diameter of stainless steel is larger than nylon, and the pull-out hose needs to pass through the small hole in the faucet, if your original pipe is nylon, you cannot use this stainless steel., Weight: 0.44 Pounds, Manufacturer: Gnimauhz