D60-Hand Held Hot Knife Fabric Cutter Heat Cutter (Heat cutter) 110V

DeVandy

110v 60w Heat cutter Insert each leg of the blade and tighten the knurled nuts. Make sure that the blade and the cutting head have optimal contact. If both legs of the blade are not properly installed, the unit will not heat up. Avoid direct short circuit between cutting heads; Clean cutting heads with enclosed wire brush; Please make sure the blade is connected to the cutting material before blade heats up. Cut the rope with diameter 2cm, and the webbing, with fine cutting edge, no disperse. Attached with the cutting foot, the hot knife cut the synthetic fiber cloth without backup under the cloth, seal the cutting edge as well; cut the seal line on the bag. Especially good for cutting sail cloth, awnings and filter cloth. Always operate the hot knife in well ventilated space., Manufacturer: DeVandy