Spax Facade Cut Point Stainless Steel Torx Screws
SPAX
Use: for visible and invisible screwing of façade woods in outdoor areas, e.g. floor cover formwork. High corrosion resistance thanks to stainless steel A2 Raised countersunk head for aesthetic look and clean countersinking thanks to milling ribs. Optimum power transmission and clean fit with SPAX bit T-Star plus T20 with guide pins Effortless work and longer battery life: no pre-drilling (depending on the wood). Precise attachment and reduction of the splicing effect thanks to the drilling function of the CUT tip. Easier cutting of the wood fibre thanks to Spax-typical wave profile Made in Germany: TÜV certified. Approved by building authorities: European technical approval for screws as wood fasteners in load-bearing wooden constructions (ETA-12/0114) Box contents: 1 SPAX box, 200 pieces facade screws, T-Star plus, raised countersunk head, partial thread, cut tip, stainless steel A2, material quality: 1.4567, thread diameter (Ød1) = 4.5 mm x total length (Ls) = 45 mm, partial thread length (LgT) = 30 mm, head diameter (Ødk): 8.8 mm, bit not included included, Weight: 1.4109584768 Pounds, Manufacturer: SPAX International GmbH & Co. KG
Compare prices (3 shops)
| shop | Price | Action |
|---|---|---|
|
28,72 GBP | Go to shop |
| Tooled Up | 43,95 GBP | Go to shop |
|
52,49 GBP | Go to shop |
