Snowbee Screw-In Wader Studs - 19060

Snowbee Screw-In Wader Studs - 19060

Snowbee

Snowbee Screw-In Wader Studs - 19060\n\nSNOWBEE SCREW-IN WADER STUDS\n\nSnowbee Screw in Wader Studs, super hard, zinc plated steel studs, give additional grip to felt, or cleated sole waders. \n\nThe wader studs are suitable for most types of waders or wading boots. For easy application the studs can be inserted either with a hexagonal head socket, or a cross head screwdriver.\n\nFor best results insert 6 studs around the edges of the heel area and if required a similar number around the toe area and the instep.\n\nIt is not recommended to insert the studs into the main weight bearing mid sole area; this may result in the studs puncturing the inner sole. Also always check the depths of the sole in relation to stud length (Screw part of stud approx. 10mm) before you begin. If there is any doubt as to the thickness of the sole, then it is an idea to start screwing the studs in, to open up the hole, then unscrew them and snip or file off the sharp point of the stud, then re-affix. - Go.

Compare prices (1 shop)

Sort: Price: lowest first Price: highest first
shop Price Action
12,37 GBP Go to shop

Similar products