Scorpion HKII-2208 Shaft Kit : HK_2208_Shaft

Name: Scorpion HKII-2208 Shaft Kit : HK_2208_Shaft
Brand: Scorpion

Scorpion

Midland Helicopters Ltd\n\n-- Listings\n\n-- Feedback\n\n-- About\n\n-- Listings\n\n-- Feedback\n\n-- About\n\nDetails of SKU: HK_2208_SHAFT\n\nScorpion HKII-2208 Shaft Kit : HK_2208_Shaft\n\nThe Scorpion HK-22mm series of motors are built with 3mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a \""Less than Perfect\"" landing, you may bend or break one. For these occasions, we offer factory replacement shafts for all the HK-22mm Scorpion Motors. \nThe shaft for the HK-2208 series motors measures 4mm in diameter, and is 45.7mm in long. The pinion end of this shaft is ground down to 3.17 mm. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.\n\nNote: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or i.