Screw Extractor Socket wrench 5mm M6 M8 M10 Allen Bolt Remover ENGINEER DWZ-05

Name: Screw Extractor Socket wrench 5mm M6 M8 M10 Allen Bolt Remover ENGINEER DWZ-05
Brand: ENGINEER

ENGINEER

the sharp and fine-pitch spiral tip 'grips' all 6 sides of a hex socket firmly ...without slippage! no need to strike with a hammer - just press the extractor bit firmly into the ruined hex screw head & twist it out other screw head types such as Phillips, Torx, square socket can be extracted *if* an electric drill is used to drill a pilot hole in the screw head first (please refer to the guide in the photo gallery) Socket size: 3/8" drive (please check your socket driver square connector size first - it should measure 9.5mm) constructed from high carbon steel Made in Japan, Weight: 0.04850169764 pounds, Manufacturer: ENGINEER