Hex Screw Extractor Socket wrench 8mm M12 M14 M16 M20 Allen ENGINEER DWZ-10

Name: Hex Screw Extractor Socket wrench 8mm M12 M14 M16 M20 Allen ENGINEER DWZ-10
Brand: ENGINEER

ENGINEER

[zipedit]\nThe ENGINEER DWZ-10 is Screw Extractor bit which fits onto your own 3/8\"" drive (9.5mm square) socket wrench - it's specifically designed for the quick & easy removal of screws with Hexagon socket (Allen Key) type heads.\nPlease note, the DWZ-10's 'Metric designator' compatibility (M12, M14 etc.) depends on the type of Screw/bolt head type you are tackling (please refer to the photo gallery for illustrations)...\n--10mm hex size compatibility (as measured across flats)\n--Suitable for M12 cap bolts\n--Suitable for M14 / M16 button & flat head screws\n--Suitable for M20 set screws (grub screws)\n--the sharp and fine-pitch spiral tip 'grips' all 6 sides of a hex socket firmly ...without slippage!\n--no need to strike with a hammer - just press the extractor bit firmly into the ruined hex screw head & twist it out\n--other screw head types such as Phillips, Torx, square socket can be extracted *if* an electric drill is used to drill a pilot hole in the screw head .