Timco 100175Wmh Welded Masonry Joist Hangers - Galvanised 100 X 175 Unit 1

TIMCO

Designed to support 100 x 175mm timber joists from brick or block walls. This welded masonry joist hanger can be built into new masonry or installed during renovation by raking out existing brickwork, providing a secure joist bearing and a dependable connection for floor and roof structures.. Key Features. Designed for supporting timber joists from brick or block walls.. Welded construction for a strong, rigid hanger.. Galvanised (pre-galvanised) steel for corrosion resistance.. Conforms to Eurocode 6 and service class 2.. Manufactured to BS EN 845-1:2013+A1:2016.. Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber.. 75mm bearing for consistent joist support.. 2.4mm thickness.. 6 nail holes (3.75mm) for secure fixing.. Safe working load: 3.5kN.. Supplied as a single unit (MOQ 6) for trade orders and site stock.. Typical Applications. Supporting floor joists built into brickwork and blockwork.. New-build masonry where hangers are built-in during construction.. Refurb and repair work where masonry is raked out to install the hanger.. General timber-to-masonry joist support where a consistent joist bearing is required.. Specifications. Product code. 100175WMH. Type. Welded. Finish. Galvanised. Joist size (W x H). 100 x 175mm. Width (W). 100mm. Height (H). 165mm. Bearing (B). 75mm. Thickness. 2.4mm. Nail holes. 6 (3.75mm). Safe working load. 3.5kN. Approval. BS 5628. CE standard. BS EN 845-1:2013+A1:2016. Eurocode. 6. Service class. 2. Corrosion rating (1–5). 2 – Occasionally damp/wet, rural and sheltered areas. Material. Carbon Steel. Pack type. Unit. Pack quantity. 1 Each. Pack dimensions (L x W x H). 165 x 100 x 75mm. Pack weight. 0.74kg. Packs Received. 6