Polypipe 465C12 Polyfast 20mm x 1/2in LD Class C MDPE Adaptor Set - Mid Blue

Name: Polypipe 465C12 Polyfast 20mm x 1/2in LD Class C MDPE Adaptor Set - Mid Blue
Brand: Polypipe

Polypipe

Powered by Frooition\n\nmj_plastics_and_plumbing\n\nPolypipe 465C12 Polyfast 20mm x 1/2in LD Class C MDPE Adaptor Set - Mid Blue\n\n--\n\nItem Description\n\nPolypipe Polyfast MDPE Mid Blue Adaptor Set 20mm x 1/2\"" L.D. (Low Density) Class C B.S.1972 - 465C12\nImperial LDPE/HDPE \n(Black LDPE: BS 1972 / Black HDPE: BS3284)Polyfast Compression Fittings Jointing Instructions\n--Cut the pipe end square with the axis using pipe cutters or shears.\n--Select\n the correct insert for the size, type and pressure of pipe (e.g. \n\""½\"" LDPE CLASS D\"") and the correct size of imperial grab ring \n(e.g. ½\""). NOTE: inserts/imperial grab rings are supplied in standard packs.\n--Remove\n the nut from the fitting and discard the standard metric 'grab-ring'. \nEnsure that the seal/thrust washer remain in position and check that the\n factory applied lubricant grease is present on the rubber seal.\n--Place the nut over the pipe end and push the imperial grab-ring over the pipe )