Vango Airspeed Tube 730cm - Hex

Name: Vango Airspeed Tube 730cm - Hex
Brand: Vango

Vango

In the unlikely event that you may need to replace your AirBeam tube, simply remove the old tube from the beam sleeve and replace with the new tube. Once the beam sleeve is zipped and secured, replace into the tent sleeve and inflate. The AirSpeed tubes are quick and easy to change, so that you can carry on with your camping holiday as soon as possible! This Beam will only fit the earlier models of the Airhub Hex, [will not fit the newer Airaway Hex II] Fully deflate the AirBeam tube to be replaced Unzip the outer sleeve of the AirBeam on the inside of the flysheet Remove the AirBeam from the internal zipped sleeve. Cut the cable tie that holds the zips together (ties stop accidental opening) Remove the inner tube from its protective outer Place the new inner tube inside the protective outer. Align valve with the opening in the protective outer. Zip closed, taking care not to catch the inner tube. Reconnect the zips together with the cable tie provided, to prevent accidental opening when the AirBeam is inflated Re-inflate AirBeam to the correct PSI Re-insert the AirBeam into the zipped sleeve on the tent flysheet