NUCBCULWP Vacuum Cleaner Accessory，Compatible For ABIR ，X5,X6,X8 ，Robot Vacuum Cleaner Wheel Parts With Motor

NUCBCULWP

Storage suspended: When the vacuum cleaner is not in use for a long time, find a piece of cardboard to elevate the body, so that the wheels are suspended without touching the ground. It is recommended to manually rotate the wheels once a month to avoid the flat deformation of the rubber wheel surface caused by prolonged compression on the same side. Paired replacement: If a wheel is found to be significantly worn, it is recommended to replace both the left and right wheels at the same time. You can keep the snap spring or washer on the old wheel as a backup in daily life. Changing one side alone will cause the machine body to tilt, and the suction head cannot be tightly attached to the ground, affecting the cleaning effect. Moisture proof ventilation: Do not place the vacuum cleaner in damp basement or bathroom corners for a long time. Daily recommendation: After each use, place it in a ventilated balcony for half an hour, let the moisture on the wheels dry, and then push it back to the storage room to prevent the metal shaft from rusting and getting stuck. Avoid wires: When pushing the vacuum cleaner, be careful not to push the base wires or carpet spikes under the wheels. It is recommended to start sucking from the middle of the room in daily life, and slow down when approaching the wall, so as to avoid sudden wheel jamming that may cause the machine to tilt and collide. Regular cleaning: Before each vacuuming, check for long hair or cotton threads wrapped around the wheels. It is recommended to use toothpicks or small scissors to gently pry open the entangled area in daily life, without forcefully pulling, otherwise the gap between the wheel axle will become tighter and tighter, and it will feel heavy when pushed.