Single Banjo Pressure Brake Switch M10x1.00mm Light 5034862352996
BIKE IT
M10 x 1.00mm Brake Light Pressure Switch (Single Line Fitment)\nHydraulically actuated rear brake switch replaces the banjo bolt at the rear master cylinder. Then simply connect to the stock wiring. Ideal for race rearset applications, where no fitment is available for stock rear brake switch. Hydraulic brake switches do not require any adjustment\n--M10 x 1.00mm single length banjo switch, ideal for rear brake applications\n--M10 x 1.00mm is used on many Italian built motorcycles, but please check the existing banjo has a M10 x 1.00mm pitch thread\n--Can be used with race rearsets where there are no attachments for a standard brake light switch to be fitted\n--Can also be used on front brakes where only a single line / banjo is used to the master cylinder (please note this will NOT fitted where the front master cylinder has two lines to the master cylinder\n--Complete with two crushable washers\n--2 x male bullet connectors\n--Approx 55cm complete length
Compare prices (1 shop)
| shop | Price | Action |
|---|---|---|
|
24,49 GBP | Go to shop |
