Probe for operating turnout motors (use with PL-18) Peco PL-17

Name: Probe for operating turnout motors (use with PL-18) Peco PL-17
Brand: Peco

Peco

Peco PL17 Probe For Operating Turnout Motors (use with PL-18)\nPLEASE REVIEW THE PHOTOGRAPHS AS WELL, ACCESSORIES/BOXES ETC WILL BE SHOWN IF THEY ARE INCLUDED. WORKING ORDER: N/A COSMETIC CONDITION: New. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered PL-17 probe on the stud the Turnout Motor is activated. BOXED: Packeted NOTES:\n\nPLEASE REVIEW THE PHOTOGRAPHS AS WELL, ACCESSORIES/BOXES ETC WILL BE SHOWN IF THEY ARE INCLUDED.\n\nWORKING ORDER: N/A\n\nCOSMETIC CONDITION: New. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered PL-17 probe on the stud the Turnout Motor is activated.\n\nBOXED: Packeted\n\nNOTESy