DMR V8 v2 Pedal Servicing Tool DMR-TOOL-V8-V2

DMR

DMR V8 V2 Pedal Service Tool Workshop Servicing Rebuild Spares Tools Pedals New\n\nThe DMR V8 V2 Pedal Service Tool, designed to adjust the 11mm base nut on the Dual Bushing bearing system. Found on the current V8 pedal with grey plastic end caps.\n\nThis tool will also fit the new \u2018Classic\u2019 V8 pedal , with the updated DU Bushes.\n\nUse this thin wall Cro-Moly Steel socket with a 13mm spanner to \u2018back off\u2019 the 11mm base nut against the 9mm lock nut on the end of the axle to adjust the pre-load on the bearings.\n\nTools required to service or adjust V8 Dual Bushing pedal:\n\n--15mm spanner or 6mm allen wrench \u2013 to remove pedal from crank arm.\n\n--Pick \u2013 to pop off end cap.\n\n--9mm Socket \u2013 to adjust lock nut.\n\n--13mm Spanner \u2013 to adjust V8 service tool.\n\n--DMR V8 Service Tool \u2013 to adjust 11mm base nut on axle against lock nut.\n\n--Small Flat Blade Screwdriver \u2013 to hold/jam 9mm lock nut when adjusting base nut.\n\nIf you require.