1/10 Scale RC 12mm to 17mm Wheel Hex Hub Adapter Alloy Black x 4 Extension 30mm

Name: 1/10 Scale RC 12mm to 17mm Wheel Hex Hub Adapter Alloy Black x 4 Extension 30mm
Brand: BSP

BSP

\n12mm to 17mm Hex Black Adapter x 4 Extension 30mm\n4mm to 12mm Thread\n \nThis will fit 1/10 models using a 12mm hub. Note not suitable for 2WD (using bearings instead). Please check measurements below before ordering as this will not fit all.\n \nSimply replaces the normal 12mm hubs with these adapters. Great if looking to put 1/8 scale 17mm hex wheels on your model and extending out by 30mm.\n \nHow to check if this will fit?\n \n1) Simply check all 4 wheels use a 12mm hub already (you will still need this).\n2) The axle is 4mm in diameter (thread).\n \nThis will fit HSP models 1/10 (all).\n \nHow to install?\nThese slot onto the 12mm hub fitted to a 4mm thread axle. Use the silver bolt to secure the hub in place (4mm threaded center). Next put a 17mm hex wheel on the end and secure using the included 17mm nut.\n \nWhats in the pack and measurements?\n4 x 12mm to 17mm adapters.: \n - 38mm measured end to end\n - 5mm center hole f;