Timco Drive In Post Spike Quick Fit Hot Dipped Galvanised75 X 750mm from B&Q

Timco

Drive-In Post Spike (Quick-Fit, Hot-Dipped Galvanised) provides a fast, no-dig way to install timber fence and gate posts in firm ground. The heavy-duty steel spike is driven into the soil to form a secure foundation, while the quick-fit clamping mechanism locks the post above ground with minimal tools for a rigid, twist-resistant hold. The hot-dipped galvanised (HDG) zinc finish delivers long-term corrosion protection and a clean, professional appearance.. Key Features & Benefits. No-Dig Installation: Drive straight into firm ground—ideal where excavation would disturb paving, roots or buried services.. Quick-Fit Clamp: Rapid tightening for a secure, twist-resistant connection with minimal tools.. Above-Ground Protection: Lifts end grain clear of standing water to help reduce rot risk.. Hot-Dipped Galvanised: Thick zinc coating for durable outdoor corrosion resistance.. Fast, Accurate Setup: Use a drive-in cap/tool for rapid alignment and consistent results.. Available Sizes. To Suit Post Size (mm). To Suit Post Size (inch). 75 × 75. 3 × 3. 100 × 100. 4 × 4. Product & Technical Details. Type: Drive-in post spike (quick-fit clamp). Material: Heavy-gauge steel. Finish: Hot-dipped galvanised (HDG). Fixing Method: Drive spike into ground; tighten quick-fit clamp to secure post. Applications: Fencing, light gates, pergolas, signage and garden structures. Instructions for Use. Mark the post line. Place the spike square to the surface where it is to be installed.. Using a compatible drive-in cap/tool and a sledge hammer, drive the spike to depth, checking plumb frequently.. Insert the timber post fully; plumb and square it, then tighten the quick-fit clamp evenly.. Re-check alignment after initial settling; re-tighten during routine inspections.. Limitations & Precautions. For firm ground only; in soft/peaty soils or where high uplift/lateral loads exist, consider concrete-in or bolt-down solutions.. Do not strike the shoe directly—always use a drive-in cap or tool to prevent damage.. Cut post ends square and treat end grain with preservative before clamping.. Use corrosion-appropriate fixings with the surrounding structure, especially in coastal/aggressive environments.. A rapid, no-dig fixing that speeds up fence and frame installs—drive in, clamp tight and protect the post end above ground for a long-lasting, professional result. The hot-dipped galvanised finish ensures dependable durability outdoors.