Q.max Qma-1/2In Sheet Metal Punch 1/2In Qma12 from B&Q
Q.Max
A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be ordered separately. To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.Size. 1/2 in.Key Type 7/32 in hexagonal wrench.
Compare prices (1 shop)
| shop | Price | Action |
|---|---|---|
|
18,86 GBP | Go to shop |
Similar products
-
Q.max Qma-1.1/2In Sheet Metal Punch 1.1/2In Qma112 from B&Q
From 31,42 EUR -
Q.max Qma-1.3/16In Sheet Metal Punch 1.3/16In 5052587026947
From 23,42 EUR -
Q.max Qma-22.5M Sheet Metal Punch 22.5Mm 5052587027258
From 20,71 EUR -
Q.max Qma-11/16In Sheet Metal Punch 11/16In 5052587027067
From 18,34 EUR -
Q.max Qma-Sq3/4In Square Sheet Metal Punch 3/4In 5052587026893
From 109,12 EUR -
Q.max Qma-11M Sheet Metal Punch 11mm Qma11M from B&Q
From 18,44 EUR
