Timco - Black Metal Paint - Smooth Finish (Size 380ml - 1 Each)

Timco

Black Metal Paint – Smooth Finish is a durable, high-opacity aerosol topcoat formulated for metalwork. It delivers a clean, even black film with a smooth, low-sheen appearance, ideal for refurbishing gates, railings, brackets, machinery guards and fixtures. The easy-spray format gives fast, consistent coverage on bars, edges and complex shapes for professional-looking results on site or in the workshop.. Key Features & Benefits. Smooth Black Finish: Levels to a uniform, low-sheen appearance that hides minor surface imperfections.. Durable Protection: Tough topcoat for everyday weathering and wear when correctly applied.. Excellent Coverage: High-opacity film helps mask repairs and colour variation.. Versatile Use: Suitable for ferrous metalwork and primed substrates.. Fast Application: Aerosol reaches welds, corners and detailed sections with minimal overspray.. Product & Technical Details. Type: Smooth-finish black aerosol metal paint. Colour/Finish: Black, smooth (low-sheen). Substrates: Ferrous metals; suitable primers required on bare metal and non-ferrous. Environment: Interior & exterior when applied over appropriate primers. Typical Uses: Gates, railings, balustrades, brackets, frames, fixtures and general metal projects. Suitable Applications. Protective and decorative finishing of steel/iron. Maintenance touch-ups and refurb work. Site and workshop applications where a smooth black finish is desired. Instructions for Use. Prep: Remove rust/loose coatings to a sound surface; abrade, degrease and dry thoroughly.. Prime: Use a suitable metal primer (e.g., red oxide/grey) on bare metal; spot-test over existing coatings.. Shake: Agitate can for 2–3 minutes after the ball rattles.. Spray: Apply light, even coats from 20–30 cm, allowing brief flash-off between coats.. Cure: Allow to dry fully before handling or exposing to the weather; apply additional coats as needed.. Limitations & Precautions. Apply in dry, well-ventilated conditions above 5 °C; avoid high humidity.. Not a rust converter—remove corrosion and prime appropriately.. Aerosol is flammable and pressurised; keep away from heat/ignition and follow all safety guidance.. Black Metal Paint – Smooth Finish provides a quick, tidy route to a resilient, uniform black topcoat on metalwork—perfect for smart, long-lasting results indoors or out.