Durite 12V 200A Smart Programmable Voltage Sensitive Split Charge Relay 0-727-43

Durite

12V Smart Programmable Voltage Sensitive Relay 200A12 volt 200 amp relay designed to be used with the latest range of vehicles fitted with smart alternators and regenerative braking systems. With 9 programmes and override function.\nCan be used in secondary battery charging systems and as a battery saver protecting the main starter battery from excessive drains.\nINSTALLATION INSTRUCTIONS\nTerminal 30 to main battery +12V\nTerminal 87 to secondary battery or separate circuit +12V Terminal 85 to ground or -0V\nTerminals 86 is used for programming or override function\nOVERRIDE FUNCTION\nConnect terminal 86 through a momentary switch (not supplied) to terminal 30.\nWhen the switch is operated, and the circuit is made the unit will make the connection be- tween terminals 30 and 87 for 30 seconds from when the switch is released.\nPROGRAMMING FUNCTION\nTo enter programming mode, the power must be off to terminal 30 and terminal 85 must be connected to ground or -0V.\nConnect terminal 86 .