Bond It Tanking Slurry Waterproofing & Damp Proofing Tub Mixing Bucket 20Kg Grey from B&Q

Bond it

Description:A cementitious waterproof coating designed for use below and above ground for cellars, retaining walls, andtanks.Benefits:u Excellent adhesion to most common building materials – seesurface preparation.u Water based ‐ safe to apply on damp surfaces.u Easy application ‐ applied by brush.u Resistant to positive and negative water pressure up to 7 Bar.u WRAS approved.UsesHigh performance; high water resistance (EN 998-1), flexibility, goodadhesion and set control in a water mix form. Bond It TANKING SLURRY is ablend of Portland cements, quality graded aggregates and chemicalmodifiers, which provide a waterproof coating system.Suitable Applications: Tanks, pits and swimming pools; Above and belowground walls and floors; Cellars, underground rooms; Interior spaces, e.g.ducting, party walls, lift shafts; Fish ponds.Preparation Of Substrate1. Suitable for use with; brick, stone, and concrete surfaces.2. It is recommended sources of water and damp are removed. A dampproof course should be employed.3. All contact surfaces must be clean and sound, and free from dust,grease particles and loose material or previous coatings. The surface mustbe prepared using abrasive tools, jet washing or wire brushing and anydebris removed with clean water. A sound mechanical key surface mustbe achieved prior to slurry or backing render application, otherwise dampwill build up under the tanking coating and will affect the bond to thesubstrate.4. Tap off water pressure where necessary insert a fillet at floor and walljoint.5.Running water and surface defects, such as holes, cracks or fracturesshould be filled with Bond It PLUG IT. PLUG IT can be over coated withTANKING SLURRY as soon as it is cool and dry to the touch.