3/8in Drive Torque Wrench With 1/4in + 1/2in Impact Adaptors 19Nm – 110Nm

AB Tools

Professional torque wrench for commercial or occasional home use 3/8inch drive torque wrench with a convertor and a reducer to enable the ratchet to be either 1/4in or 1/2in drive as wellAllows you to use any socket 1/4in, 3/8in and 1/2in drive of any specific measurement (metric, imperial, Whitworth and other bits as well) TORQUE WRENCH DESCRIPTION3/8in drive professional torque wrenchManufactured from CR-v steel for maximum strength and durabilitySmooth action mechanism providing accurate torque settings every timeFully adjustable torque wrench with ratchet headKnurled handle for comfort and grip when using this application3/8in drive so will fiot any 3/8in drive sockets / extensions (but with the adaptors included it will also fit any 1/4in or 1/2in socket as wellWhen the required torque setting is reached the wrench produces an audible click and a slight release of tensionClockwise torque but can also be used to undo by the switch of a lever on the ratchet headTotal length of the torque wrench – 380mmSPECIFICATIONS•3/8in drive torque wrench •Lockable grip for accurate / repetitive results•Accuracy + / - 4%•19Nm – 110Nm / 15ft/lbs – 81ft/lbs•Comes in a blow molded case for easy storage and transportationCONVERTOR / REDUCER DESCRIPTIONComes complete with 2 x impact reducers / step upsWill convert the supplied ratchet to either 1/4in drive or 1/2in drive depending on specific requirements Adaptors are manufactured from CR-v steel for maximum strength and durabilityImpacted convertors so will stand up to high torque requirements so can be used off this ratchet and on an impact gunSuitable for impact gun useComes with 2 x ball bearings to stop the socket from falling off when using1 x 3/8in – 1/4in (step down) 1 x 3/8i.