ER32 COLLET CHUCK FOR MYFORD SUPER 7 ML7 LATHE WITH COLLETS AND SPANNER RDGTOOLS
RDGTOOLS
ER32 COLLET CHUCK WITH BUILT IN MYFORD THREAD,\nTHIS IS A 2PC HEAD SYSTEM,\nTHIS SYSTEM IS DESIGNED TO CREATE THE BEST ACCURACY AVAILABLE ON YOUR MYFORD LATHE\nFITTING INSTRUCTIONS:\n1)CLEAN ALL PARTS.\n2) FIT THE BACKPLATE TO THE MACHINE\n3)ROUGH TURN THE REGISTER\n4) SKIM FACE AND BLEND WITH THE DIAMETER\n5) FINISH THE REGISTER\n6) OFFER UP THE ADAPTOR AND SKIM MORE IF NEEDED\n7) CLEAN THE ADAPTOR AND SECURE WITHTHE 3 SCREWS BUT DO NOT TIGHTEN\n8)USE A DTI ON THE TAPER TO CHECK THE ACCURACY\n9) IF REQUIRED TAP DOWN THE HIGH POINT AND RE CHECK\n10) TIGHTEN THE SCREWS\nCOMES WITH SET OF ER32 COLLETS THAT RANGE BETWEEN 2-20MM CAPACITYTHESE COLLETS WILL HOLD THREADED AND STRAIGHT SHANK ENDMILLS / DRILL BITS ETCCOLLETS COME IN FITTED STORAGE CASE ER32 COLLET NOSE SPANNER INCLUDED\nWe are stockists of thousands of engineering tools and brands including Presto,\n Proxxon, Kreg, Tormek, Titebond, Gorilla,\n Veritas,\nEclipse, Molyslip, Moore & Wright, Britool, Facom and e
Compare prices (1 shop)
| shop | Price | Action |
|---|---|---|
|
162,50 GBP | Go to shop |
