BAG OF 10 - 8mm End Feed Equal Tee - FREE Next-Day Delivery
ODSUPPLIES
This listing is for a Pack of 10 The internal bore of this copper end feed tee is designed for minimal restriction ensuring smooth fluid transition across all three directions with low friction loss and reduced turbulence in heating loops and hot/cold water mains. To prepare copper pipe for end feed fittings, cut it square, deburr the edges, clean the pipe end and fitting socket to bright metal with an abrasive pad, and apply a thin layer of flux before assembly. To solder an end feed fitting, clean and flux the joint, assemble it, heat the copper evenly with a blowtorch until it reaches melting temperature, and apply solder wire to the socket edge so capillary action draws the molten metal into the gap around the entire pipe. WRAS Approved and BS EN 1254 compliant, Weight: 0.220462262 pounds, Manufacturer: Navigator
Compare prices (2 shops)
| shop | Price | Action |
|---|---|---|
|
7,01 GBP | Go to shop |
|
8,60 GBP | Go to shop |
Similar products
-
Odsupplies Brass - 8Mm Compression Equal Tee
From 4,08 EUR -
Odsupplies Brass 22Mm Compression Equal Tee - Bag Of 2
From 10,87 EUR -
-
Odsupplies Bronze 15Mm End Feed Elbow - Bag Of 10
From 5,55 EUR -
Odsupplies 35Mm End Feed Coupling
From 5,85 EUR -
