ODS - 1/2"" Wallplate With 15mm Copper Tail x 350mm - FREE Next-Day Delivery

ODSUPPLIES

IMPORTANT SIZING NOTE - Most plumbing products are measured using BSP thread dimensions which measure 1/4 inch larger than that stated, therefore this 1/2 Inch BSP female thread actually measures 3/4 Inch in diameter. This wallplate is used to install an outside tap easily through a typical solid wall up to 300mm thick A hole greater than 15mm diameter should firstly be drilled through the wall and the tail fed through and the plate end holding the 1/2 inch BSP thread then screwed to the outside face of the wall A 1/2 inch BSP bibtap (outside tap) can then be secured to the female thread and the water supply screwed to the plain using 15mm pressfit, pushfit, compression, end feed or pre-soldered fittings, Weight: 0.440924524 Pounds, Manufacturer: Cubralco