ODS - BAG OF 10 - 15mm End Feed Stop End - FREE Next-Day Delivery

ODSUPPLIES

This listing is for a Pack of 10 To prepare copper pipe for end feed fittings, cut it square, deburr the edges, clean the pipe end and fitting socket to bright metal with an abrasive pad, and apply a thin layer of flux before assembly. Ensure there is zero standing water inside the pipe. Even a single drop of water turning to steam during heating will blow the molten solder out of the capillary gap. An end feed stopend (also known as a copper end cap or capillary blanking cap) is a solid copper fitting used to permanently seal or terminate the end of a copper pipe run. Like other end feed fittings, it has a plain socket that requires solder wire to be fed manually into the joint when heated with a torch. The copper pipe and inside of the stop end should be thoroughly cleaner using wire wool or cleaning pads. A suitable flux should be applied following cleaning to prevent oxidisation., Weight: 0.220462262 Pounds, Manufacturer: Cubralco