Bond It Heavy Duty Contact Adhesive Solvent Based Neoprene Glue High Grab Liquid Contact AdhesiveBeige850Ml from B&Q

Bond it

A premium grade, solvent based, yellow/ beige coloured, single component solvent‐based contact adhesive.THIS PRODUCT IS TOLUENE‐FREE.UsesCONTACT ADHESIVE can be used for bonding cork, leather, rubber,Metals, wood, chipboard, hardboard, laminated plastics (e.g.Formica), dense textiles, plaster, stone, concrete, cementitiousScreeds and smoothing compounds. It will bond rigid PVC anduPVC sheets but the materials should be checked for suitabilityPrior to application as solvent attack can occur in some instance.Bond It CONTACT ADHESIVE may also be used to bond lightweightMaterials to vertical surfaces and ceilings. It is predominantlyDesigned for interior use but can be used externally when theAdhesive is protected from direct sunlight and water.This product is not suitable for polystyrene, polythene,Polypropylene, silicone rubbers, bitumen or PTFE. The solvent inthe contact adhesive may attack certain painted or lacqueredSurfaces.APPLICATION:Stir the glue thoroughly, prior to use, until a uniform consistency isobtained.Apply the adhesive to both surfaces being bonded with a notchedscraper, brush or trowel to produce a thin film. In cool, dampconditions take care that no condensation takes place on the gluelines as it will affect the adhesive bond. If condensation (evidentby a grey "bloom" on the glue) does occur delay bonding until theglue is moisture-free. If the open time is exceeded, re-apply theadhesive to both surfaces. Leave the adhesive to become touchdry (approx 5-30 minutes)Package Content:1 x Bond It Heavy Duty Contact Adhesive - Beige, 850ml.