Bond It - High Strength Brick Acid 5L (Clear) - Cement & Mortar Splasher Remover

Bond it

DescriptionA acid based cleaner formulated to remove unsightly stains caused by numerous every dayoccurrences, as well as builders splatterUsesFor removing cement and mortar splashes, light oilstains and grease from brickwork, paving, tiles,earthenware and concrete. Bond It HIGH STRENGTHBRICK ACID should not interfere with the various typesof concrete and stone (except limestone and marble)commonly encountered in the general building area.Efflorescence can also be removed by using thisproduct diluted.ApplicationGloves, overalls, boots and goggles should be worn atall times during application. Protect metal surfaces andpaint-work before application with polythene sheetsand tape. Remove excess dirt, mortar, etc. with a stiffyard brush. If cleaning down brickwork saturate areawith water to prevent damage to mortar. Beforecommencing a full clean down, test on aninconspicuous area with Bond It HIGH STRENGTHBRICK ACID diluted 4:1, water to cleaner. For normaluse dilute between 2 and 4 parts water to 1 partcleaner. Apply using a brush and allow to stand for 10-15 minutes ensuring the area does not dry out and isscrubbed occasionally with a stiff yard brush. Rinsethoroughly with large amounts of water, do not addwater to neat cleaner, always add the cleaner to thewater. If stains persist, repeat the process and/or usethe cleaner undiluted taking care to test the neatcleaner first on an inconspicuous area. For removingefflorescence use a 8:1 dilution water to cleaner.Always use a plastic container for diluting this product.