Bond It A43 Thread Lock Studlock Loctite Sealant Hi Strength Glue Adhesive 25Ml from B&Q
Bond it
Available Size:25mlDescription:A medium viscosity, medium strength, screw and thread locker. Capable of bonding “As Received” parts coveredwith a light film of oil. Non‐drip consistency for clean, economic applicationUses:Bond It A43 THREADLOCK can be used as a locking compound for direct application to lightly oiled components, thus reducing the need for pre-treatment. Also suitable as a standard anaerobic thread locker for fine to medium pitch threads.Preparation:Remove heavy oil and grease contamination. Best results are obtained on clean parts.Application:Apply sufficient adhesive to coat the threads. The adhesive will start to cure on exclusion of air from the bonding system. Observe handling and strength times stated below.Bonding Time:Assuming room temperature is 20oC.- Handling: < 15 minutes.- Full strength: 24 hours.Limitations:A43 THREADLOCK is designed for metal bonding. Users should satisfy themselves as to the products efficacy when used in conjunction with engineering rubbers and plastics. Not recommended for use with accelerators.The strength of the Thread lock bond will be substantially lower on Stainless Steel. On certain grades it may not work at all without the use of an activator. It is the user’s responsibility to check suitability of this product with their particular application.Colour:THREADLOCK is blue in colour.
Compare prices (2 shops)
| shop | Price | Action |
|---|---|---|
|
6,59 GBP | Go to shop |
|
6,99 GBP | Go to shop |
Similar products
-
-
LOCTITE 142286 518 Gasketing Sealant 25ml
From 27,60 EUR -
-
Loctite Glass Bond Glue
From 2,23 EUR -
-
