Bond it 20Kg Rapid-Flex Tile Adhesive Rapid Fast Setting Floor Wall CeramicWhite from B&Q

Bond it

Description:A fast setting cement based, thin or thick bed wall and floor tile adhesive. It is suitable for fixing ceramic, quarry,porcelain, vitrified, natural stone, travertine and mosaic tiles in internal locations. Conforms to EN 12004 ClassC2F.Benefits:Rapid setting, flexible and deformable.Does not require admixtures.Can be grouted after 2 hours.Is suitable for ceramic, porcelain, vitrified, mosaic,marble and natural stone tiles.Uses:Bond It RAPID-FLEX is a flexible, fast setting, thick or thin bed adhesive for bonding ceramic, quarry, porcelain, vitrified, natural stone, travertine and mosaic tiles to walls and floors. Because of the fast acting properties, tiles can be grouted and suitable for use in approximately 2 hours after fixing (at normal temperatures). RAPID-FLEX will bond to concrete, sand/cement screeds, building blocks and brickwork. It can be used to bond to wooden surfaces, glazed surfaces or used with underfloor heating. RAPID-FLEX is suitable for interior use including locations which are subject to regular wetting eg. domestic showers and bathrooms. NOTE: This product is not suitable for use in areas subject to permanent water immersion. A separate flexible admixture is not required.Preparation:The substrate must be clean, structurally sound and free from dust, oil, grease and any other contamination that may prevent adhesion. It should also be strong enough to support the weight of the tiles being fixed. RAPID-FLEX can be applied to dry or moist surfaces but moisture sensitive materials must be dry and remain dry after fixing. Porous gypsum, aerated concrete and interior asphalt substrates should be primed with products such as Bond It PRIMER AND FLEXIBLE ADMIXTURE.