Aquasparkle Stabilised Chlorine Granules 1kg Hot Tub Spa Pool Chemicals Hottub

Aquasparkle

AquaSparkle Stabilised Chlorine Granules 1KG\nAquaSPArkle Spa Chlorine Granules are rapidly dissolving and ensure your spa water stays safe and bacteria free with a minimal impact on the pH of your hot tub water.\nHow to Use\n--Maintain pH level within the ideal range for chlorine use of of 7.2 \u2013 7.6.\n--Test your water and maintain a free chlorine residual in your hot tub within the range 3 \u2013 5mg/litre (ppm).\nNB Freshly filled new spas or spas left drained for a period of time require an initial start up dose of 20mg/litre (ppm) of free chlorine circulated for a minimum of 2\u00BD hours.\n--These chlorine granules may be applied directly to spa water where temperatures exceed 20 degrees C. If the water temperature is lower pre-dissolve this product in a clean plastic container at a maximum concentration of 10g of granules to 1 litre of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned on.\n.