Plastica 1Lt Relax Leak Sealer

PLASTICA

Leak Sealer - 1 litre - For minor leaks in swimming pools and spas.\nThis leak sealer remains the professionals’ favourite. Its special formula can seal small holes/leaks in hot tub & swimming pool pipework & swimming pool 'liners'.\nIt CANNOT be guaranteed to fix 'every leak' but it is remarkable nevertheless and if you call out a repair company they will more than probably try this product first anyway!\nSave a fortune and do it yourself.\nThis bottle will treat up to 60,000 litres of water.\nDirections for Use\n1) Turn pool pump off. Remove any automatic pool cleaner from the pool.\n2) Set the filter on By-pass or re-circulate setting. If neither of these settings are available then remove the filter grids or cartridges from the filter prior to commencing treatment.\n3) Leak Sealer should be added to the pool at the rate of 1 litre per 60,000 litres of pool water. There are two methods of application depending on the location of the leak.\n\nA) Leak in pool walls or floor - add the leak sealer directly into the pool water. Where it is possible to locate the area of the leak then add the product in this area. Otherwise distribute the product evenly around the pool.\nB) Leak in pipework - Add the correct dose of leak sealer directly into the skimmer. Leak sealer is a heavy product that will collect at the deep end. To ensure maximum effectiveness circulate the product as follows. Set up a pool vacuum hose as for normal cleaning. Place the vacuum head at the deepest point in the pool. Ensure the hose is free of air. This method ensures maximum circulation through the pipework if unsure of the location of the leak use method b.\n\n4) Wait 30 minutes and then turn the pump on. Leave the pump running for a minimum of 8 hours.\n5) Mark the water level and check after 24 hours.\n6) A second application may be required in larger pools.\n7) Retu.