CHARNWOOD W692 Woodworking Dust & Chip Extractor, 2200w, 3hp Motor

Charnwood

The largest extractor aimed at workshops where extraction is not continuously needed.Powerful & Quiet 3hp Induction Motor2 Inlets For Simultaneous ExtractionQuick Action Metal Bag StrapsTransparent Heavy Duty Collection Bag5 Micron Filter Bag16amp, 240v Electric Supply RequiredDrum Bag Clips to make easy work of changing the collection bagRubber Band on the Drum to give a better sealThese more powerful machines give a higher flowrate per hour which allows a longer hose length to be attached or a small system of branches and gates to be fitted around the workshop.The largest in this range is for users who occasionally need a very high air volume. The two collection bags are filled together so that emptying is required less frequently. It can be used to collect from up to three machines simultaneously or attached to a system of branches & gates to be fitted around the workshop. Maximum recommended total hose length is 10 metres.Supplied with 5 micron filter bags, transparent collection bags, durable steel fan, NVR switch, rubber wheels, quick release metal straps, 3 way inlet & 1.6m power cable (No plug).A 16amp fixed electric supply is required to run this machine. We recommend using a 16amp plug.Hose is not supplied as standard, our 100mm diameter transparent hose is recommended, sold by the metre.This machine is intended for Light Trade use which means it has a maximum continuous running time of 2 hours, after which the motor must be rested and left to cool.Charnwood W692 SpecificationMotor (induction)2200w (3hp), 240vFlowrate (cubic metres per hour)3000m3/hourInlet diameter1 x 150mm or 3 x 100mmCollection bag capacity296 LitresMaximum continuous run time2 hoursDimensions (WxDxH)1560mm x 550mm x 1920mmWeight75kgProduct Guarantee5 Years.