FUSEBOX 20A 30mA AFDD RCBO 1P+N TYPE A

FuseBox

FUSEBOX 20A 30mA AFDD RCBO 1P+N TYPE A Premises with sleeping accommodation, for example, houses, hotels, and hostels. Locations with a risk of fire due to the nature of processed or stored materials, for example, stores of combustible materials. Locations with combustible constructional materials, for example, wooden buildings. Fire propagating structures, for example, thatched buildings and timber-framed buildings. In the current edition of the IET Wiring Regulations, BS 7671:2018, it is a recommendation to install AFDDs but the customer can choose to omit them. However, this decision should be based considering any relevant risk and safety factors against the cost of installation. Fusebox Arc fault detection devices are worth consideration if there is an increased risk of fire, such as: Locations with endangering of irreplaceable goods, for example, museums, listed buildings and items with sentimental value. It may also be worth speaking to your insurance company, to see if they would payout in the event of a fire if AFDDs were not installed as recommended in BS. Features: Current rating options: 20A. Number of poles: 1P+N (Switched) Rated voltage (Un/Ac): 230V Frequency (Hz): 50/60 Rated breaking capacity (Icn): 6000A (6kA) Tripping characteristics: B CURVE : 3-5In Residual current characteristics: TYPE A (AC AND PULSATING DC UP TO 6mA) Rated residual operating current (Iδn): 0.03 Mechanical endurance: 10,000 IP rating: IP20 Maximum terminal capacity: 1-16mm² IN L / 1-10mm² OUT N L Recommended tightening torque (Nm): 2.5Nm IN L / 1.2Nm OUT N L Flying neutral cable length (Mm): 450 (can be cut to suit) Overvoltage protection: >285V Energy limiting class: 3 Mounting: 35mm Din rail mounting.