Woodpeckers Saw Gauge 2.0
Woodpeckers
Cosmetic marks: \nAfter-market table saw accessories have always faced the same dilemma, mitre gauge slots vary by both design and manufacturing tolerance. Woodpeckers founder, Rich Hummel, solved the problem while working on the original Woodpeckers Saw Gauge. By dropping two small polished pins in the bottom of the slot and placing a larger pin between them, the middle pin stays precisely centred regardless of the mitre slot width or any deviation from end to end. It doesn't matter what kind of saw you have, old, new, American, European or Asian if the slot is in the range 3/4\"" then the Woodpeckers Saw Gauge 2.0 registers precisely on the centre of the mitre slot. \nDrop the pins in the mitre slot, adjust the arm on the gauge so the dial indicator just kisses the saw blade and check it at the front and back of the blade. It's that easy. \nWhile Woodpeckers original Saw Gauge uses the same slot location method, it has a maximum reach of 165mm (6-1/2 inches). In version 2.0 version,.
Compare prices (1 shop)
| shop | Price | Action |
|---|---|---|
|
250,00 GBP | Go to shop |
Similar products
-
Woodpeckers Align-A-Saw Gauge Only from B&Q
From 108,00 EUR -
Woodpeckers in-DEXABLE Miter Gauge - Metric
From 198,00 EUR -
Woodpeckers Align-A-Saw Plate Only from B&Q
From 198,00 EUR -
-
-
