AUKTools Router Insert Plate Template and Steel Insert Pad

Name: AUKTools Router Insert Plate Template and Steel Insert Pad
Brand: AUK Tools

AUK Tools

If you are making your own table and you want an easy way to make a perfect cut-out for a router plate or lift, including AUKTools, Woodpeckers, INCRA or JessEm, the AUKTools Router Insert Plate Template and Steel Insert Pad is the perfect combination. With this template and insert, you can rout out a perfectly sized 9-1/4\"" (235mm) x 11-3/4\"" (298mm) opening using a template router bit with a bearing on the shank (not supplied) and then lay the insert into the opening for an accurate flat surface for your router plate to reference. \nMachined from 18mm MDF (400mm x 560mm) for a perfectly smooth bearing surface and large enough for clamps. \nThe AUKTools Stainless Steel Insert Pad is a 1.8mm thick insert that is suitable for use with 9-1/4\"" (235mm) X 11-3/4\"" (298mm) router plates or lifts, including AUKTools, INCRA, JessEm and Woodpeckers. \nQuality router plates and lifts incorporate levelling screws to set the plate flush within router table tops but if the levelling screws are i.