Harris Beer pH Test Strips Pack of 50 strips Colour ranges are 4.6 to 6.2

Name: Harris Beer pH Test Strips Pack of 50 strips Colour ranges are 4.6 to 6.2
Brand: Harris Homecraft

Harris Homecraft

Harris Beer pH Test Strips. Pack of 50 strips. \nBeer pH Indicator strips measure the acidity or alkalinity of a solution using 5 different pH values. The colour ranges are 4.6, 5.0, 5.4, 5.8 and 6.2. \nThese pH strips are very easy to use. The best time to apply them is about 5 minutes into the mash. Just dip the swab strip into the mash for 2 seconds then remove it. Shake off any excess liquid then compare against the colour chart on the packaging within 30 seconds. \nWhen mashing, obtaining the correct pH level is important for optimum results. If the pH of the mash is wrong, your beer may develop off-flavours. However, if the pH balance is correct, your beer will achieve a better fermentation, better clarity and ultimately a better taste. \npH of the mash. \nThe best way to produce great beer is to ensure your mash has the correct pH. The optimum pH reading is between 5.0 and 5.4. The pH value of your mash may vary each time as it depends upon the water and the quantities and typ.