Stonecare4UEfflorescence Remover (5L)Removes Salts & Efflorescence From BrickworkMasonry & Other Resistant Surfaces from B&Q

B&Q

Essential Efflorescence and Salts Acid Remover is not recommended for acid-sensitive polished stone surfaces such as limestone, marble, and manufactured stone. To ensure compatibility, test the product in a non-obtrusive location first, as acid-sensitive surfaces can sustain irreparable damage. Delicate surfaces such as chrome, enamel, and wood must be protected from splashes and vapors, as acid-based cleaners can produce vapors that might damage these surfaces. Coverage will vary depending on the extent of contamination, with one liter covering between 15m² to 30m². Key Features: Safe for non-acid-sensitive surfaces Removes efflorescence and salts Effective on a variety of surfaces Covers 15m² to 30m² per liter Available in 5L and 25L HOW TO APPLY: Preparation : Clear any loose material from the work surface and ensure you have proper personal protection, such as gloves, protective eyewear, a face mask, and appropriate clothing. Dilution : The product can be used straight or diluted up to 1:5 with clean water. Always test a small area to determine the appropriate dilution rate and dwell time. Application : Wet the surface, then apply Essential Efflorescence and Salts Acid Remover either neat or diluted up to 1:5 with water, depending on the degree of contamination. Treatment : Apply the solution evenly to the surface with a sponge, brush, or sprayer. Allow it to sit for 10-15 minutes before scrubbing the area and rinsing with plenty of clean water. Caution : Do not allow the product to dry on the surface. Reapplication : In cases of significant contamination, the treatment may need to be repeated. Please Note : Essential Efflorescence and Salts Acid Remover is not recommended for polished or highly honed acid-sensitive stone surfaces such as limestone, marble, and artificial stone.