StoneCare4U Tile and Grout Sealer Spray 600ml - Solvent-Based Deep Penetration - Fast Drying - Stain Protection - Clear

StoneCare4U

Essential Tile and Grout Sealer Spray is a VOC-compliant, solvent-based solution that permeates grout effectively, resisting oil and water-based stains while allowing the surface to breathe. The sealer does not leave difficult-to-remove residues on ceramic tile, porcelain, glass, stone, or grout and maintains a non-yellowing, long-lasting finish that does not alter the surface's appearance. Coverage is up to 15m² per 600ml container. Key Features: VOC-compliant and solvent-based Penetrates grout thoroughly Resists oil and water-based stains Allows surfaces to breathe Non-yellowing and long-lasting Does not alter the appearance of the surface Coverage up to 15m² per 600ml HOW TO APPLY: Preparation : Ensure the area is well-ventilated and wear personal protective equipment, such as gloves, eye protection, and an appropriate vapour mask. Surface Cleaning : Make sure the surface is completely clean and free of waxes, sealants, or coatings of any type. Application : Shake the can thoroughly before use. Spray Essential Tile and Grout Sealer Spray 25-40cm from the surface. Apply the product evenly, wiping away any excess if applying on vertical surfaces. Drying : Allow the solution to dry for 1-2 hours. Test an area with droplets of water. If the droplets are absorbed rather than beading on the surface, additional coats may be necessary to achieve the desired effect. PLEASE NOTE: Allow the solution to dry for 1-2 hours before testing. If the water droplets are absorbed rather than beading on the surface, a second or third coat may be required to achieve the desired result.