Orac Decor C331 Premium Coving Moulding

Orac

This swept wave like polyurethane coving features a small step to its leading edge and makes an excellent alternative choice to plain plaster coving. The Orac Luxxus C331 coving profile creates a shallow profile against ceilings covering just over 2 inches of wall and projecting slightly over 5 inches into the room. Whilst this application works very well in modern homes with low ceiling heights it can also look splendid when turned through 90 degrees and using the 5 inch height to create a crown like profile around the wall with the smaller projection going across the room. Clients have reported complete installations in 6 to 7 hours when working in warm summer conditions that allow rapid adhesive curing. Ideal for lounge coving and dining room coving. C331 coving or cornice is one of our best sellers in the Orac Luxxus coving range. The coving profile is 6 x 13.5cm and has a diagonal of 14.8cm. The C331 coving has a 's' shape long sweep with a step top and bottom to finish. It is designed as a modern contemporary coving and can be mounted vertically or horizontally. There is also a matching flexible coving the C331F flexible coving. In a bay or with a curved wall curved coving sometimes known as radius coving is needed and Orac flexible coving is a unique solution. Coving for curved bays and curved walls in the past could only be fitted by specialist coving installers. The C331F flexible coving is produced in the same moulds as the rigid coving using a formula of rubberised material. The C331 rigid coving and C331F flexible curved coving can be used in together to achieve both straight coving and curved coving as the wall shape dictates. Suggested mouldings to use with the C331 coving and C331F curved coving are the P8020 rigid dado rail and P8020F flexible dado rail and the SX118 skirting and SX118F flexible skirting and R17 ceiling rose. Alternative options are of course equally suitable. Length: 200cm Height: 6.4cm Width: 13.5cm.