Stainless Steel Folding Hinge 12Pcs 180° Degree Foldable Hinge Flap Screw-On Hinges for Sewing Machine Cabinet Door Furniture Hardware Accessories
WonJoxel
Two-Part Hinge With Hydraulic Damper: The hinge body contains a sealed cylinder filled with viscous fluid. When the door swings closed, a piston moves through the fluid, creating controlled resistance that slows the door during the final degrees of travel Three-Dimensional Adjustment Screws: The hinge includes two adjustment screws that shift the door position relative to the frame. Turn one screw to move the door left or right, and turn the other to move it up or down, without removing the hinge from the cabinet Snap-On Mounting Plate: A separate mounting plate attaches to the cabinet frame first. The hinge body then clips onto this plate with a spring-loaded latch. Press a release lever to remove the door for painting or cleaning, then snap it back into place without retooling Full Coverage Door Design: The hinge is configured so the door completely covers the front edge of the side panel when closed. This layout leaves no visible gap between the door and the cabinet frame, creating a flush front surface Simple Cleaning And Hinge Check: Wipe the hinge arms and visible metal surfaces with a dry cloth to remove kitchen grease. Once every six months, open the door fully and observe the closing motion. If the door stops moving before fully closed, wipe the hinge arms again and check for any debris caught in the folding joints, Manufacturer: WonJoxel
Compare prices (1 shop)
| shop | Price | Action |
|---|---|---|
|
10,99 GBP | Go to shop |
