Replacement Filter Compatible with LEVOIT Core 600S-RF Air Purifier

Kpeaoy

Composite Layered Structure for Sequential Particle Filtration: The filter combines multiple distinct layers in a single frame. Air moves through the first layer, which collects larger visible debris, then passes through finer layers that trap smaller particles, with each layer handling a different size range without premature clogging Open-Weave Outer Layer for Large Debris Collection: The outermost face has a wide, loose mesh that catches visible material. Air flows through this section first, and the open structure stops fibers, hair, and larger particles from reaching the denser inner layers Dense Fiber Inner Media for Fine Particle Retention: The interior section is packed with tightly woven synthetic fibers. Air passes through this high-density area, and the compact structure holds particles too small to be seen, leaving the exiting air clear Rigid Sealed Frame Prevents Air Bypass: The outer border is formed from stiff material with a tight fit against the purifier housing. Install the filter in the unit, and the sealed edges direct all incoming air through the filter media rather than leaking around the sides Installation and Maintenance Practice: Power off the unit and remove the front cover. Slide the old filter out by its frame, insert the new one with the airflow arrow pointing in the correct direction, and close the cover. To extend filter life, tap the outer layer gently over a trash bin to dislodge loose debris, or use a soft brush on the intake side only. Replace the filter when the airflow noticeably decreases or after the recommended usage period, Manufacturer: Kpeaoy