G3/4in Hall Effect Rate Meter MalE Male Thread 1~30l Min Sensor Gauge♡

Feature: \n 1. Insulation withstand ability: The Hall sensor lead wire and the valve body are pressurized by AC600V (50/60Hz) for 1 second without insulation abnormality.\n2. Cold resistance: It is placed in the environment of -20\u00B13\u00B0C for 72h, returning to normal temperature for 1-2h without abnormality, and the parts have no crack, slack, expansion and deformation.\n3. Moisture resistance: After being placed at 60\u00B13\u00B0C and relative humidity of 90%~95% RH for 72h, the insulation resistance is above 1M\u03A9.\n4. Pulling strength: Apply 10N pulling force for 1 minute on the lead-out line, without loosening or breaking.\n5. Thermal shock resistance: placed in an environment of 80\u00B13\u00B0C for 1h, then placed directly in the environment of -20\u00B13\u00B0C for 1h for a cycle, a total of 10 cycles, no cracks, slack, expansion, deformation, etc. phenomenon. \n\nSpecification: \nFeatures: \n\n--\n\nImpact resistance: The product is packed well, free fall from :