2pcs 1.5‑16mm 45 Steel Punching Mold Hollow Hole Puncher Leather Belt Punch Too
Feature: \n 1. According to different materials and thickness requirements, the die head has different shapes such as pointed and flat heads, pointed paper cards, etc.\n2. For cloth leather thick material, please use cylindrical punch, with small pad or rubber mold\n3. For materials with higher elasticity, the diameter of the hole is about 3~4 mm smaller than the inner diameter of the eyelet buckle.\n4. For materials with slight elasticity, the diameter of the hole is smaller than the inner diameter of the eyelet by about 0.5~1 mm.\n5. For materials that are not elastic, the diameter of the hole is the same as the inner diameter of the eyelet. \n\nSpecification: \n\nFeatures:\n\n1. According to different materials and thickness requirements, the die head has different shapes such as pointed and flat heads, pointed paper cards, etc.\n\n2. Above 11 mm inside diameter is flat punch. Available in 1.5mm-16mm size\n\n3. For cloth leather thick material, please use cylindrical punch, with s:
Compare prices (1 shop)
| shop | Price | Action |
|---|---|---|
|
11,54 GBP | Go to shop |
