FHRKA Geomembrane Welding Machine,HDPE Hot Wedge Welder Tool Kit,Plastic Membrane Hot Wedge Welder with Double Pressure Roller (220v 20cm)

FHRKA

【Geomembrane Welding Machine】This welding machine is widely used and can be used to weld various soluble plastic materials, such as PP, PVC, HDPE, ECB, EVA, PE, ABS, etc. Commonly used in anti-seepage applications such as membranes, geotextiles, panels, drainage panels, composite membranes, etc. 【Technical Parameters】Voltage: 110v/220v; Frequency: 50Hz; Power: 800W/1100W; Welding speed: 0.5-5m/min; Heating temperature: 0-450 degrees; Overlap width: 10cm/15cm/20cm; Welding width: 16mm×2, inner cavity 12mm; Seam strength: >85% of base materials (tensile strength in cutting direction), Full machine weight: 5kg; Insulation level: Level II. 【Highs Quality Double Pressure Wheels】The machine comes with two pressure wheels, which are to high temperatures and have smooth and firm welding results. The pressure can be adjusted according to the thickness of the film. The rubber wheel with lower pressure is suitable for welding thicknesses of 0.2mm to 1.5mm, and the steel wheel with higher pressure is suitable for thicknesses of 1.0mm to 2.0mm. 【Working Principle】The motor drives the upper and lower pressure rollers to rotate through the reduction gearbox and chain. The sliding carriage drives the hot wedge and inserts it between the two base materials, at the same time the lever presses the pressure rollers and couples the two fused base materials.welding machines has high power, fast welding speed and good welding quality. 【WIDE RANGE OF APPLICATIONS】This welding machine is suitable for various fields such as water conservancy, aquaculture, roof construction, etc. It is suitable for anti-seepage constructions in tunnels, underground structures, embankments, artificial lakes, aquatic plants, landfills, petrochemical facilities, landscaping, roofs, etc.