PPLDABNK Mounted Air Conditioning Cleaner Wash Hood, Ac Dust Washing Kit

PPLDABNK

【SUITABLE FOR 1‑3 HP AIR CONDITIONERS】The water inlet width adjusts freely between 60 and 130 cm, using an elastic band and a rubber band adjustment buckle for easy resizing. It fits both small 1 HP units and large 3 HP floor‑standing models—one cleaning cover covers multiple sizes. 【ENLARGED TOP SPACE】The top of the cover is taller and roomier than standard cleaning covers, giving you plenty of clearance when spraying water to clean the evaporator—no more worrying about the water nozzle hitting the ceiling. There's ample space to rinse the impeller and fins with high‑pressure water, and you can easily reach inside to adjust the angle as needed. 【REINFORCED PLASTIC SUPPORT PLATES ON BOTH SIDES】Each side of the cover is reinforced with a plastic support plate. During setup, simply push it outward to fully unfold the cover. It holds its shape throughout the cleaning process, preventing it from collapsing onto the air conditioner and keeping the water inlet and drain outlet properly aligned. 【2.4‑METER DRAIN PIPE】Both the inner and outer fabric layers are waterproof, so water won't seep through during high‑pressure rinsing, keeping your walls and floors dry. The 2.4‑meter drain hose connects to the bottom outlet on one end and leads to a bucket or floor drain on the other. The large diameter allows dirty water to flow out quickly. 【WITH RUBBER BAND ADJUSTMENT CLIP】The inlet edge features a rubber band and adjustment clip. Once you've opened it to the right width, slip the cover over the indoor unit and tighten the rubber band for a snug fit. No need to remove screws or the front panel—just attach the hose and start cleaning. After you're done, remove the hose and wipe the exterior dry. This won't affect the normal operation of your air conditioner.