Air Conditioner Cleaning Bag Wall Mounted Split, Ac Dust Washing Kit

PPLDABNK

【SLIP-OFF WHEN SLIPPED ON】The cleaning cover has rigid PVC support plates embedded on both sides. Once installed, they expand and hold the cover securely in place, preventing it from slipping off during cleaning. The rear baffle fits tightly against the wall, blocking dirty water during rinsing and keeping both the wall and electrical outlets dry. 【WATER-FREE RINSING】The cover is made of polyester material, which stops water from seeping through the fabric during high‑pressure rinsing. The top opening effectively covers the gaps around the air conditioner's indoor panel, helping to prevent water from reaching the motor and circuit board areas. 【RAPID DRAINAGE OF DIRTY WATER】The bottom drain outlet on this air conditioner cover is 11 cm wide—much wider than standard cleaning covers—allowing dirty water to collect and drain quickly. The 2.8‑meter drain pipe is heat‑sealed into the cover to prevent leaks at the connection point, directing water straight into a bucket or floor drain. 【INTEGRATED CLEANING COVER 210 × 40 CM】This cleaning cover is an integrated, one‑piece devise measuring approximately 210 cm long and 40 cm wide. One person can easily handle it when unfolded. Simply pull open the PVC side supports, slide the cover onto the indoor unit, and adjust the rear panel to fit snugly against the wall. No extra help is needed. 【SUITABLE FOR 1‑2 HP AIR CONDITIONERS】Designed for 1‑2 HP wall‑mounted and split‑type air conditioner indoor units. Just slide on the cover, connect the drain hose, and start cleaning the evaporator and fan. After finishing, remove the cover, wipe the exterior dry, and you can turn the air conditioner back on—no water residue will remain to affect operation.