⁺240-33ohms Fuel Sending Unit 10in IP67 Accurate Fuel Gauge Sending Unit US.
Feature: \n 1. Characteristic: All fuel sending units consist of a selection of reed switches and fixed resistors. SAE 5\u2011hole mounting mode, heavy duty 316 stainless steel, solid structure. Signal output: 240 ohm \u2011 33 ohm.\n2. Application: The fuel level sensor can support the fuel level gauge and tank level gauge of the ship, RV, truck, equipped with washers and mounting screws to prevent the sensor from contacting the bottom of the tank,\n3. Long Lasting: The advantages of this doughnut float type level sender over the thick film swim arm type level sender lie in the durability and reliability of the reed switch. There is no need to adjust the tank.\n4. Installation Instructions: if it is a plastic fuel tank, the length of the sensor should be 1in / 2.5cm less than the depth of the fuel tank; if it is a metal oil tank, it should be 0.5\u20111 inch / 1.25\u20112.5cm deeper than the fuel tank.\n5. 35mm Float: The float has a diameter of 1.38in (35 mm). If a hole must be dri:
Compare prices (1 shop)
| shop | Price | Action |
|---|---|---|
|
26,95 GBP | Go to shop |
Similar products
-
-
-
-
240-33ohm Fuel Sending Unit For Ship Yacht Truck RV ;.
From 24,53 EUR -
-
